AEA RPQ2 Microphone Preamplifier
The AEA RPQ2 preamp and EQ provide two channels of high-output, high-impedance, and low-noise gain with a rich and natural sound that brings out the full potential of your microphones.
- Two channels with 81dB of sweet and quiet JFET gain
- High-frequency CurveShaper™ EQ and low frequency proximity control
- 63k ohm high-impedance circuitry providing better overall transients, frequency response, and higher output sensitivity
- High-resolution, high-impedance front-panel 1/4" DIs
- Mic/Line mode with Post-Mic and Pre-EQ Inserts for convenient routing options
- Switchable phantom-power and polarity reverse
- Made in the U.S.A.
ENHANCE YOUR RIBBONS - The AEA RPQ2 Ribbon Preamp and EQ provide two channels of high-output, high-impedance, and low-noise gain with a rich and natural sound that brings out the full potential of your microphones. Specifically designed for ribbon microphones, the RPQ2 excels at drawing out the warmth and lush sound that ribbons are uniquely known for. ENHANCE YOUR RIBBONS - The AEA RPQ2 Ribbon Preamp and EQ provide two channels of high-output, high-impedance, and low-noise gain with a rich and natural sound that brings out the full potential of your microphones. Specifically designed for ribbon microphones, the RPQ2 excels at drawing out the warmth and lush sound that ribbons are uniquely known for. LESS NOISE THAN OUTER SPACE - With the RPQ2, you will never consider a source too quiet to record with a ribbon mic ever again. Passive ribbons with low output levels require preamps that supply a high level of output. If the preamp you use doesn’t have enough clean gain, the mic signal may seem too soft or noisy which may be apparent when recording quiet acoustic guitars or strings, especially at a distance or with long cable runs. The RPQ2 eliminates this concern.
The CurveShaper EQ - The RPQ2’s CurveShaper™ EQ is a powerful tool that gives you the ability to control your ribbons right at the start of the signal path. Adjustable low and high-frequency controls allow you to tame proximity problems and provide high-frequency extension with slope control. The high-frequency filter boost enables you to add presence and air to your source –perfect for sources like ribbons and 2-busses that often benefit from some extra top-end. The low-frequency control easily removes bass build-up in a fast and unobtrusive way. The AEA RPQ2 Ribbon Preamp provides two channels of high-quality, high-gain, low-noise preamplification that complements the natural tonality of your microphone.
HIGH IMPEDANCE MAKES A HUGE DIFFERENCE - The sound and tonality of dynamic microphones like ribbons and moving-coils are directly affected by the impedance of a preamp. The higher the impedance, the better the sound. The RPQ2 boasts an extra high input impedance of 63K Ohms. Preamps with an impedance of under 10k ohms will limit the lows, highs, and transients of your passive microphones. The RPQ2’s high impedance will reveal your microphone’s true nature– a thick low-end, open top-end, and articulate transient response that you will need to hear to believe. Both condensers and active microphones will also benefit from the RPQ2’s impedance.
Your Sound At Your Fingertips - Many mixing and mastering engineers turn to the RPQ2 purely for its post-processing EQ and routing functionality.
EXCEPTIONAL PREAMPS - Passive microphones, coupled with AEA’s range of ribbon-specific preamps, are the key choice for discerning recordists who want total control over their signal path. AEA offers the RPQ2, RPQ500 and TRP2 microphone preamps, all of which provide unmatched clean levels of gain and high impedance. All AEA Ribbon Preamps all share the same topology and sound. The differences between each unit come down to extra features and form factor.“AEA's RPQ2 gives me the high gain, high impedance tool that i need to open up the sound of my favorite ribbon mic's with the added bonus of low noise and easy tonal control. whether recording large string sections for television or intimate vocals for a record, my ribbon mic's have never sounded better!" - James Saéz (Social Distortion, Jerry Lee Lewis, Marcus Miller, Better Call Saul)
Recording Mag || “The new RPQ2 seems to have a few dB of extra headroom, which is a great difference to have. All in all, this is a very impressive “straight wire with gain” preamp, with a unique and useful EQ section great for mics of all types. Naturally, it’s amazing on passive ribbons and dynamic mics, and the more you make use of those, the more you need the RPQ2.” – Paul Vnuk Jr.
Sound on Sound || “With the RPQ2, AEA has improved on what was already an excellent ribbon-mic preamp... I still remember being surprised by how much better my passive ribbon mics sounded when I first started using the TRP instead of conventional preamps, and that holds just as true for the RPQ2.” – Hugh Robjohns
Resolution Magazine || “Two things strike you immediately: the level of transient detail that comes through, and the sense that both microphones never seem to struggle to deliver good, healthy signals.” – Jon Thornton
Technical Specifications
Gain at 1kHz | 81dB of gain at 1kHz, balanced-in to balanced-out in Microphone Input Mode |
Noise figure, rms A-weighted | <2dB |
Noise figure, rms unweighted | <3dB, 20 kHz LPF bandwidth |
EIN | <-130 dBu A-weighted, 150 Ohm resistive source |
Frequency Response | -3dB <1Hz and >100 kHz |
THD | <0.02% at 1 kHz |
Input Impedance | 63K Ohms |
Input Impedance (P48 Engaged) | 10K Ohms |
Line Input Impedance | 18K Ohms |
Hi-Z Input Impedance | >5M Ohms |
Mic Gain Control | Twelve-position switch provides from +13dB to +62dB of gain for the pre- amplifier circuit, as measured between the input and the before the output line driver. |
Switched LF Shelving Filter | -3dB break-frequency tunable from 22 Hz to 515 Hz; maximum reduction -20dB. |
Switched CurveShaper EQ | +3dB break-frequency tunable from 2.5 kHz to 30 kHz; HF gain adjustable from +0dB to +20dB; slope of the HF filter varies interactively & directly with the CurveShaper™ frequency & gain settings. |
XLR Output Maximum Level into 600Ω Load | +28 dBu, balanced; 0 dBu = 0.7746 V rms |
XLR Connectors Polarity | Pin-1 is ground, pin-2 is high, pin-3 is low. |
LED Signal Level Indicators |
Green LED snaps on at -20 dBu to indicate the presence of signal; Yellow LED snaps on at 0 dBu; Red LED snaps on at +24 dBu to warn of approaching signal overload |
Dimensions / Weight |
1U Height: 1.75 in (4.45 cm) Width: 19 in (48.5 cm) Depth: 9 in (23 cm) Weight: 4 lb. 5 oz. (2 kg) |