IK Multimedia Bus Compressor Plug-In || Your Software Registration Code and Instructions Will Be Sent to You, Along With an URL Connecting You Directly to The Manufacturer, Who Will Provide You With Your Software. We are Authorized IK Multimedia Resellers. Verify Our Credentials on the Xchange Market. Please Be Aware That Software Is Non-Cancelable and Non-Returnable. If you have any questions about this product please do not hesitate to contact us.
This module is included in:
- T-RackS 5 MAX
This audio processor module is part of T-RackS CS "Custom Shop" Mixing and Mastering Plug-In Collection.
Bus Compressor Processor - Mix Bus Compressor - Glue effect on your mixes. The Bus Compressor is based on the mix bus VCA type compressor of a worldwide known and acknowledged British large format mixing console from the 80's. It was used on practically every hit record and major production from the 80's to present days, so much that its sound has almost become a trademark. This compressor was so widely used that it later became a stand-alone rackmount unit, so that it could be used separately from the large format console. This made for even more success; a thing that led to many hardware and software clones trying to emulate it.
This legendary processor has been painstakingly analyzed and measured down to the very single component, compression curve, soft knee behavior and detection circuit; this in order to obtain a dead on reproduction that will impart a cohesiveness to mixes that is often referred to as "glue effect" where every instrument blends nicely with the others, and mixed tracks suddenly start to sound like "music".
Like many of our hardware based modules we've added several nice and handy features not present on the original; in this case we added the "Grit" switch that will reproduce the slightly increased 2nd harmonic distortion of an out of calibration unit, a behavior favored by many engineers for its more characterful sound.
Oversampling - The Sidechain HP filter has been added to filter low frequencies out of the detection circuit path so that they wont overmodulate compression, thus avoiding the "pumping" effect at lower threshold and higher ratios. When not engaged though the “pumping” effect delivered by this module is astonishing, making it equally at home on loud rock mixes or slamming dance tracks.
The 1.5:1 ratio has been added for subtle and even compression making mixes "shine" without sounding compressed. We like to see it sitting on the mix buss of your DAW, where it was ideally designed to be, but it also rules on other stereo sources, like drums submixes or parallel compression buses: this use is also well known to engineers and producers the world over, a very effective for “obscene” amounts of compression, punching and pumping drum rooms and creative effects.
Specs
- Works within the T-RackS CS Standalone application
- High-quality oversampling
- High-precision and high-transparency digital processors
- Accurately analog-modeled vintage classic devices
- Full-latency compensation support
- Supports sampling rates up to 192 kHz
- DSM™ and SCC™ proprietary IK technologies for extremely accurate digital models of analog hardware devices
- Native compatibility with 64-bit applications and operating systems
System Requirements
T-RackS 5 is a 64-bit application and requires a 64 bit CPU and Operating System.
Mac® (64-bits)
- Minimal: Intel® Core™ 2 Duo, 4 GB of RAM (8 GB suggested), macOS 10.9 or later.
- Supported Plug-in formats (64-bit): Audio Units, VST 2, VST 3, AAX.
Windows® (64-bits)
- Minimal: Intel® Core™ 2 Duo or AMD Athlon™ 64 X2, 4 GB of RAM (8 GB suggested), Windows® 7, Windows® 8 or Windows® 10. Requires an ASIO compatible sound card.
- Supported Plug-in formats (64-bit): VST 2, VST 3, AAX.
- NOTE: EQual processor requires an OpenGL 2 compatible graphics adapter.
Internet connection is required as all of the Custom Shop operations are web based.